temp

wafer_layouts/single_idt.scad

@@ -1,6 +1,7 @@
 include <../modules/bidirectional_idt.scad>
 include <../modules/parameter_text.scad>
 include <../modules/wafer.scad>
+include <../common_paramas.scad>
 
 // ================= README =================
 // these are the normal parameters used by
@@ -15,7 +16,6 @@ include <../modules/wafer.scad>
 // parameters window
 // ================= README =================
 
-
 // ================= openscad prams =================
 
 // min angle
@@ -30,7 +30,8 @@ $fs = 0.01;
 SCRIPT_VERSION="0.0.1";
 
 // font for layout
-FONT="Ubuntu Sans Mono:style=Regular";
+// FONT="Ubuntu Sans Mono:style=Regular";
+FONT="SquareFont:style=Regular";
 
 // the test number ref number for this set of IDTs
 test_number = 1;
@@ -41,19 +42,20 @@ scale_unit = 1e3;
 
 // ================= meta =================
 
+
 // ================= IDT =================
 
 // the underlying substrate
 substrate = "SI";
 
 // linbo
-// the acoustic wave speed in the substrate
-c = 3992.0;
+// the aoucstice wave speed in the substrate
+// c = 3992.0;
 // si
-// c = 3159.0;
+c = 3159.0;
 
 // the target frequency of the IDT
-freq = 10.0e6;
+freq = 17.0e8;
 
 // the distance between the input and output IDT
 // should be between 100-200
@@ -63,7 +65,7 @@ distance = 50;
 n_fingers = 50;
 
 // the length of the figure or aperture should be 50-70
-finger_length = 50; 
+finger_length = 60; 
 
 // the gap between both sides of the IDT (should be used for tweaking)
 gap = 0;
@@ -98,8 +100,8 @@ bond_pad_shape = "square";
 
 // ================= text =================
 
-info_block_offset_x=25;
-info_block_offset_y=10;
+render_text = true;
+
 // total scale of infoblock
 info_block_scale=0.3;
 
@@ -120,7 +122,6 @@ wafer_size_inch = 4;
 // ================= wafers =================
 
 
-
 // ================= IDT Pos =================
 
 // the x offset of the IDT from the center
@@ -128,31 +129,37 @@ idt_x_offset = 0;
 // the y offset of the IDT from the center
 idt_y_offset = 0;
 
+info_block_offset_x=25;
+info_block_offset_y=-7;
+
 // ================= IDT Pos =================
 
 module params() {
     parameter_text(
         str("IDT ", substrate, "#", test_number),
         [
-            str("c          (ms): ", c),
-            str("freq       (Hz): ", freq),
-            str("distance       : ", distance),
-            str("n_fingers      : ", n_fingers),
-            str("finger_length  : ", finger_length),
-            str("gap            : ", gap),
-            str("thickness      : ", thickness),
-            str("leg_length     : ", leg_length),
-            str("leg_angle      : ", leg_angle),
-            str("size           : ", size),
-            str("feat. size (mm): ", (c/freq)*1e3 / 4),
-            str("version        : ", SCRIPT_VERSION)
-        ]
+            str("C: ", c),
+            str("FREQ: ", freq),
+            str("DISTANCE: ", distance),
+            str("N_FINGERS: ", n_fingers),
+            str("FINGER_LENGTH: ", finger_length),
+            str("GAP: ", gap),
+            str("THICKNESS: ", thickness),
+            str("LEG_LENGTH: ", leg_length),
+            str("LEG_ANGLE: ", leg_angle),
+            str("SIZE: ", size),
+            str("FEAT. SIZE: ", (c/freq)*1e3 / 4),
+            str("VERSION: ", SCRIPT_VERSION)
+        ],
+        font=FONT
     );
 }
 
-translate([info_block_offset_x, -info_block_offset_y, 0])
-scale([info_block_scale, info_block_scale, info_block_scale])
-params();
+if (render_text) {
+    translate([info_block_offset_x, -info_block_offset_y, 0])
+    scale([info_block_scale, info_block_scale, info_block_scale])
+    params();
+}
 
 wafer(wafer_size_inch*25.4);
 
@@ -173,4 +180,124 @@ bi_directional_idt(
     bond_pad_size = size,
     center = true,
     echo_stats = true
-);
+);
+
+
+
+// // ================= README =================
+// // these are the normal parameters used by
+// // each one of the layout scripts
+// // however they do dont directly use them
+// // and instead have thier own copy
+// //
+// // this was done in order to have more control
+// // over each of the scripts themsevels 
+// // allowing each to have even more parameters
+// // and having them show up in the open scad
+// // parameters window
+// // ================= README =================
+
+
+// // ================= openscad prams =================
+
+// // min angle
+// $fa = 25;
+
+// // min size
+// $fs = 0.1;
+// // ================= openscad prams =================
+
+// // ================= meta =================
+// // version number of the current script
+// SCRIPT_VERSION="0.0.1";
+
+// // font for layout
+// // FONT="Ubuntu Sans Mono:style=Regular";
+// FONT="SquareFont:style=Regular";
+
+// // the test number ref number for this set of IDTs
+// test_number = 1;
+
+// // this is needed due to the min size value
+// // a pre scaler for the given values
+// scale_unit = 1e3;
+
+// // ================= meta =================
+
+// // ================= IDT =================
+
+// // the underlying substrate
+// substrate = "SI";
+
+// // linbo
+// // the acoustic wave speed in the substrate
+// c = 3992.0;
+// // si
+// // c = 3159.0;
+
+// // the target frequency of the IDT
+// freq = 10.0e6;
+
+// // the distance between the input and output IDT
+// // should be between 100-200
+// distance = 50;
+
+// // the number of fingers the IDT has
+// n_fingers = 50;
+
+// // the length of the figure or aperture should be 50-70
+// finger_length = 50; 
+
+// // the gap between both sides of the IDT (should be used for tweaking)
+// gap = 0;
+
+// // the thickness of the wire the connects all the fingers
+// thickness = 0;
+
+// // adds an ID number to an IDT, useful if you have multiple on a wafer
+// has_id_number = false;
+// // ================= IDT =================
+
+// // ================= bond pad =================
+
+// // the length of the bond pad leg from the edge of the IDT to the center of the bond pad
+// leg_length = 0.003;
+
+// // the width of the leg
+// leg_width = 0.00001875;
+
+// // the angle the leg comes off from the IDT,
+// // positive angle means the leg is angled away
+// // negitive angle means the leg is angled inwards
+// leg_angle = 10;
+
+// // the size of the bond pad
+// size = 0.002;
+
+// // the shape of the bond pad (not implemented)
+// bond_pad_shape = "square";
+
+// // ================= bond pad =================
+
+// // ================= text =================
+
+// info_block_offset_x=25;
+// info_block_offset_y=10;
+// // total scale of infoblock
+// info_block_scale=0.3;
+
+// // the text size of the heading in the info block
+// title_text_size = 4;
+
+// // the size of all the sub items in the info block
+// prop_text_size = 2.5;
+
+// // the size of the ID numbers in on the IDTS
+// id_text_size = 1;
+
+// // ================= text =================
+
+// // ================= wafers =================
+// // the size of the wafer in inchs (why inch and not metric like everything else because its standard)
+// wafer_size_inch = 4;
+// // ================= wafers =================